Skip to main content
Log in
Microchip Technology DSC1001BI1-004.0000T — Crystals & Oscillators

DSC1001BI1-004.0000T MEMS Oscillator – AEC-Q100, 4 MHz, CMOS

MPNDSC1001BI1-004.0000T
Active

Microchip DSC1001BI1-004.0000T, XO (Standard) MEMS oscillator, 4 MHz CMOS output, AEC-Q100 qualified, -40°C to 85°C, 1.8V-3.3V supply, 6.3 mA max supply current, standby function with 15 µA disable current.

$0.9450Ref. price · indicative, final on quote
Microchip Technology DSC1001BI1-004.0000T datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001BI1-004.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency4 MHz
Frequency stability±50ppm
Operating temperature-40°C~85°C
Size (Dimension)0.197\" L x 0.126\" W (5.00mm x 3.20mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

Supply range and standby current

Operating from 1.8V to 3.3V, this oscillator can be powered directly from a 1.8V MCU rail or a 3.3V system bus without an intermediate regulator — one less component on the BOM. For a battery-backed RTC or wake-up timer, that 15 µA leakage is low enough to keep the oscillator off during sleep without draining the coin cell.

It does not extend to the 125°C under-hood ambient that AEC-Q100 Grade 0 parts handle; if the oscillator sits near the engine block or exhaust, you need a Grade 0 part. The ±50 ppm frequency stability is tight enough for a CAN bus or Ethernet PHY reference, but not for a precision GPS or cellular PLL — those typically require ±25 ppm or better.

The 4-SMD, No Lead package with 5.00mm x 3.20mm footprint is a standard MEMS oscillator land pattern; no special fan-out or via-in-pad required.

Frequently asked questions

How does the DSC1001BI1-004.0000T compare to a standard quartz oscillator for automotive use?

The MEMS resonator gives this part better shock and vibration tolerance than a quartz crystal — quartz can exhibit frequency shifts or start-up failures under mechanical stress. The AEC-Q100 qualification confirms it has passed the same reliability stress tests (temperature cycling, ESD, latch-up) that quartz automotive oscillators undergo.

How do I enable standby mode on the DSC1001BI1-004.0000T?

The standby (power-down) function is typically controlled by a dedicated pin on the oscillator — pulling that pin low (or high, depending on the logic) shuts down the output and drops the supply current to 15 µA max. Consult the DSC1001 datasheet for the exact pin assignment and logic threshold; the standby pin is not a standard CMOS I/O and must be driven to the correct level.

Is the DSC1001BI1-004.0000T RoHS compliant and lead-free?

The evidence does not explicitly list RoHS compliance or lead-free status. Microchip's DSC1001 series is generally RoHS-compliant and lead-free, but confirm the specific date code and certificate of compliance with your supplier at RFQ — do not assume without verification.