Skip to main content
Log in
Microchip Technology DSC1001BE2-001.6000T — Crystals & Oscillators

DSC1001BE2-001.6000T MEMS XO 1.6 MHz CMOS AEC-Q100 –

MPNDSC1001BE2-001.6000T
Active

Microchip DSC1001BE2-001.6000T, XO (Standard) MEMS oscillator, 1.6 MHz CMOS output, ±25 ppm stability, 1.8V~3.3V supply, AEC-Q100, 4-SMD no-lead package.

Microchip Technology DSC1001BE2-001.6000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001BE2-001.6000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency1.6 MHz
Frequency stability±25ppm
Operating temperature-20°C~70°C
Size (Dimension)0.197\" L x 0.126\" W (5.00mm x 3.20mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

MEMS oscillator at 1.6 MHz — active production, AEC-Q100

The DSC1001BE2-001.6000T: This is a Microchip DSC1001-series MEMS-based XO (Standard) oscillator, fixed at 1.6 MHz with a CMOS output — a drop-in clock source for automotive or industrial digital logic that needs a clean square-wave clock without the startup uncertainty of a quartz crystal.

Package and mounting — 4-SMD no-lead

Housed in a 4-SMD, No Lead package measuring 5.00mm x 3.20mm with a seated height of 0.90mm — a standard footprint that mates with common oscillator land patterns on a two-layer board.

Frequently asked questions

Can DSC1001BE2-001.6000T replace a quartz crystal oscillator?

Yes. As a MEMS-based XO (Standard), it generates a CMOS clock directly — no external load capacitors or startup circuitry needed. It is a direct replacement for a quartz oscillator in the same package and pinout, with the added benefit of lower jitter and better shock/vibration tolerance typical of MEMS resonators.