Skip to main content
Log in
Microchip Technology DSC1001BC2-024.0000T — Crystals & Oscillators

DSC1001BC2-024.0000T MEMS Oscillator – 24 MHz, CMOS

MPNDSC1001BC2-024.0000T
Active

Microchip DSC1001BC2-024.0000T, MEMS-based XO (Standard), 24 MHz, CMOS output, 1.8V–3.3V supply, ±25 ppm stability, AEC-Q100 qualified, 4-SMD no-lead package.

Microchip Technology DSC1001BC2-024.0000T datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001BC2-024.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency24 MHz
Frequency stability±25ppm
Operating temperature0°C~70°C
Size (Dimension)0.197\" L x 0.126\" W (5.00mm x 3.20mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

Its 1.8V to 3.3V supply range lets it run from the same rail as a 1.8V MCU or a 3.3V SoC without a level translator.

Housed in a 4-SMD, No Lead package measuring 5.00 mm x 3.20 mm with a seated height of 0.90 mm. The 0.197" x 0.126" footprint is common across many 4-pin oscillators — the land pattern matches the standard 4-pad ceramic oscillator layout, so a PCB designed for a quartz XO can often take this MEMS part without a board spin.

The DSC1001 series is a current production line from Microchip.

Frequently asked questions

What supply voltage does the DSC1001BC2-024.0000T accept?

It runs from 1.8V to 3.3V, covering the common digital logic rails. No external regulator is needed if your MCU or SoC already supplies one of those voltages.

Is the DSC1001BC2-024.0000T AEC-Q100 qualified?

Yes.