Microchip Technology DSC1001AL5-125.0000, XO (Standard) MEMS oscillator, 125 MHz CMOS output, ±10 ppm stability, 1.8V~3.3V supply, -40°C~105°C, AEC-Q100, 4-SMD 7.00mm x 5.00mm package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 8.7mA |
| Current - supply (Disable) | 15µA |
| Frequency | 125 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead Exposed Pad |
The DSC1001AL5-125.0000 is a 125 MHz XO (Standard) oscillator built on a MEMS resonator, delivering a CMOS output across a 1.8V to 3.3V supply range.
Housed in a 4-SMD, No Lead Exposed Pad package measuring 7.00mm x 5.00mm (0.276" x 0.197") with a seated height of 0.90 mm max, this oscillator uses the common 7050 footprint.
Yes. The 7.00mm x 5.00mm 4-SMD package matches the industry-standard 7050 footprint. The 0.90 mm seated height is within the typical clearance envelope for this form factor.
The Standby (Power Down) function disables the output and reduces supply current to 15 µA max, versus 8.7 mA max during active operation. This allows the oscillator to be gated off in low-power sleep modes without an external load switch.