Microchip Technology DSC1001AL5-018.4320, XO (Standard) MEMS oscillator, 18.432 MHz CMOS output, ±10 ppm stability, 1.8V–3.3V supply, -40 to +105°C, AEC-Q100, 4-SMD no-lead exposed pad package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 18.432 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead Exposed Pad |
The DSC1001AL5-018.4320 is a standard XO built around a MEMS resonator rather than a quartz crystal, outputting a 18.432 MHz CMOS clock from a 1.8V to 3.3V supply rail.
Housed in a 4-SMD no-lead exposed pad package measuring 7.00 mm × 5.00 mm with a seated height of 0.90 mm — a standard footprint that matches many quartz oscillator land patterns, so a direct layout swap is feasible without a board spin.
The 7.00 mm × 5.00 mm 4-SMD package and CMOS output are common to many quartz oscillators, so a direct footprint swap is often possible. Confirm the supply voltage (1.8V–3.3V) and the standby (power-down) logic polarity match your circuit — the datasheet's pinout and function table are the final check.
Yes. The supply voltage range covers 1.8V to 3.3V, so the CMOS output swings rail-to-rail at 3.3V and interfaces directly with 3.3V logic families.