Microchip Technology DSC1001 series, XO (Standard) 100 MHz CMOS output, ±25 ppm stability, 1.8V–3.3V supply, -40°C to 105°C, AEC-Q100 qualified, 4-SMD no-lead exposed pad package, Tape & Reel.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 8.7mA |
| Current - supply (Disable) | 15µA |
| Frequency | 100 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead Exposed Pad |
The DSC1001AL2-100.0000T: Supply voltage spans 1.8V to 3.3V, so the same part number works in both low-voltage and standard logic domains — one BOM line covers the full rail range.
This part is still in the manufacturer's current portfolio and available for new designs. No stock-holding claim; sourced per RFQ against the exact lot quantity you need.
Yes — it carries an AEC-Q100 rating, meaning it passed the automotive-grade stress tests (temperature cycling, biased humidity, ESD, latch-up) and is suitable for under-hood and cabin electronics without additional qualification paperwork.
Yes — the standby (power-down) function disables the output and drops the supply current to 15 µA max. This lets the system power-gate the clock tree without an external load switch, saving board space and BOM cost.