Microchip DSC1001AI5-125.0060, XO (Standard) MEMS oscillator, 125.006 MHz, CMOS output, ±10 ppm stability, AEC-Q100 qualified, -40°C to 85°C, 4-SMD package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 8.7mA |
| Current - supply (Disable) | 15µA |
| Frequency | 125.006 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead Exposed Pad |
Operating from 1.8V to 3.3V, the DSC1001AI5-125.0060 works across common digital rails without a separate voltage regulator — the same BOM entry can serve a 1.8V FPGA bank and a 3.3V Ethernet PHY by adjusting the supply. Housed in a 4-SMD, No Lead Exposed Pad package measuring 7.00 mm x 5.00 mm with a seated height of 0.90 mm, the footprint matches industry-standard 7x5 mm oscillator pads — a drop-in replacement for quartz XOs of the same size.
Yes — the DSC1001AI5-125.0060 carries an AEC-Q100 rating, meaning it has passed the automotive-grade reliability stress tests (temperature cycling, ESD, latch-up) for use in under-hood and cabin electronics. The MEMS resonator adds inherent shock tolerance over quartz.
It operates from 1.8V to 3.3V, covering the most common digital logic rails. No external regulator is needed as long as the supply stays within that range.
Yes — the 7.00 mm x 5.00 mm 4-SMD footprint matches the industry-standard 7x5 mm quartz oscillator layout. The MEMS-based design offers better shock and vibration performance, making it a direct upgrade for automotive or industrial environments where quartz may fail under mechanical stress.