Microchip DSC1001 series MEMS XO, 33 MHz CMOS output, AEC-Q100 qualified, 1.8V-3.3V supply, ±10ppm stability, -40°C to 85°C, 4-SMD package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 7.2mA |
| Current - supply (Disable) | 15µA |
| Frequency | 33 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The supply voltage range spans 1.8V to 3.3V, so the same oscillator can serve a 1.8V FPGA bank, a 2.5V SoC, or a 3.3V MCU without a separate level translator.
Housed in a 4-SMD, no-lead package measuring 7.00 mm x 5.00 mm with a seated height of 0.90 mm. The 4-pad footprint is common across many MEMS and quartz oscillators — verify the pad pitch against your existing layout, but the standard 7x5 mm land pattern usually aligns with the 4-SMD footprint.
Yes, the DSC1001AI5-033.0000T carries an AEC-Q100 rating, making it suitable for automotive applications where the IC-level qualification is required.
The oscillator operates from 1.8V to 3.3V, covering the three most common digital logic rails in a single device.