Microchip Technology DSC1001AI5-027.0000T, XO (Standard) MEMS oscillator, 27 MHz CMOS output, ±10 ppm stability, AEC-Q100 qualified, -40°C to +85°C, standby function, 4-SMD package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 7.2mA |
| Current - supply (Disable) | 15µA |
| Frequency | 27 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead Exposed Pad |
Active supply is 7.2 mA max at 27 MHz, so the part draws negligible overhead in run mode for a 1.8V to 3.3V rail.
Housed in a 7.00 mm x 5.00 mm 4-SMD package with no lead exposed pad – the 0.90 mm seated height fits tight enclosures, and the four-pin layout matches standard oscillator footprints.
Yes, it carries AEC-Q100 automotive qualification, making it suitable for under-hood and cabin electronics where reliability stress testing is required.
Yes, the Standby (Power Down) function disables the output and drops supply current to 15 µA max, controlled by an enable pin.