Microchip Technology DSC1001 series, XO (Standard), 98.304 MHz, CMOS output, ±25 ppm frequency stability, AEC-Q100 qualified, 1.8V–3.3V supply, -40°C to +85°C, 4-SMD package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 8.7mA |
| Current - supply (Disable) | 15µA |
| Frequency | 98.304 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead Exposed Pad |
The DSC1001AI2-098.3040T: AEC-Q100 qualification means this oscillator is screened for automotive-grade stress and reliability — suitable for engine control units, ADAS sensor interfaces, and infotainment modules where a crystal-based clock would risk vibration-induced frequency shift.
The part accepts a 1.8V to 3.3V supply rail, so a single BOM line can serve both 3.3V and 1.8V clock domains without an extra LDO — the output swings to the supply voltage.
Yes, the part carries AEC-Q100 ratings, meaning it has passed the automotive-grade qualification tests for temperature, reliability, and ESD robustness.
When the enable pin is driven low, the oscillator enters a power-down state drawing only 15 µA max, versus 8.7 mA max during normal operation. This allows the system to gate the clock for low-power sleep modes.