The MEMS resonator base inherently resists the 30,000 g shock and 70 g vibration that can cause quartz crystals to fracture, making this a fit for under-hood and chassis-mount electronics.
Operating from a single 1.8V to 3.3V supply, the oscillator draws 7.2 mA max during active oscillation and drops to 15 µA max in standby (power-down) mode — a useful power-save feature for battery-backed or ignition-off automotive modules. The standby function lets a system ECU pull the clock low to reduce quiescent draw without removing the supply rail.
Housed in a 4-SMD, no-lead exposed-pad package measuring 7.00 mm x 5.00 mm with a seated height of 0.90 mm, the DSC1001AI2-065.5360T uses a standard 4-pin footprint that places cleanly with most pick-and-place heads. Check the MSL before you place it; Microchip typically rates MEMS oscillators at MSL 1, but confirm the reel label bake requirements if the part has been stored unsealed.