Microchip Technology DSC1001AI2-064.0000, XO (Standard), 64 MHz CMOS output, ±25 ppm frequency stability, AEC-Q100 qualified, 4-SMD no-lead package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 7.2mA |
| Current - supply (Disable) | 15µA |
| Frequency | 64 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1001AI2-064.0000 is a 64 MHz XO (Standard) built on a MEMS resonator, outputting a CMOS clock signal from a 1.8V to 3.3V supply rail.
The 4-SMD, No Lead package measures 7.00 mm x 5.00 mm with a seated height of 0.90 mm. The four pads are supply, ground, output, and enable; the enable pin ties to the Standby function.
The Standby function disables the output and drops the supply current from 7.2 mA max to 15 µA max. The MEMS resonator stops, so there is a wake-up time when the enable pin is re-asserted — the datasheet specifies the start-up time. This is useful for battery-powered or duty-cycled systems that can tolerate a brief clock re-acquisition delay.