MEMS oscillator with automotive-grade reliability
Its AEC-Q100 qualification means this oscillator meets the reliability stress and temperature-grade requirements for automotive under-hood and cabin electronics — no need for a ceramic resonator to survive vibration or thermal cycling.
Power budget and standby behaviour
The supply voltage range of 1.8V to 3.3V covers common 3.3V and 1.8V logic rails without an external level translator on the oscillator output.
Package and footprint for rework
Housed in a 4-SMD, no-lead exposed-pad package measuring 7.00 mm x 5.00 mm x 0.90 mm — the exposed pad helps thermal transfer to the board, but means the pad under the part needs a solid ground via array to keep the junction cool under continuous operation. The 0.90 mm seated height and 5.00 mm width fit standard oscillator footprints; the no-lead construction is reworkable with hot air if you preheat the board to 100°C and use a wide nozzle — the exposed pad wicks solder evenly if the stencil aperture is right.