Microchip DSC1001 series MEMS XO (Standard), 11.7 MHz, CMOS output, ±25 ppm stability, 1.8V~3.3V supply, -40°C~85°C, 4-SMD package, AEC-Q100 qualified
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 11.7 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1001AI2-011.7000: The supply voltage range of 1.8V~3.3V covers common core and I/O rails without an external regulator, simplifying the power distribution on the board.
Housed in a 4-SMD, No Lead package measuring 7.00mm x 5.00mm x 0.90mm, the oscillator mounts flat on the PCB — the 0.50 mm pitch pads require standard SMD reflow; no via-in-pad needed.
Yes, the DSC1001AI2-011.7000 carries AEC-Q100 ratings. This qualification covers the -40°C~85°C temperature grade and the reliability stress tests required for automotive PPAP. The OEM auditor will expect the PPAP documentation to be on file.
The output is CMOS at 11.7 MHz. The ±25 ppm frequency stability is maintained across the full supply voltage and temperature range, making it suitable for CAN, FlexRay, or sensor interface clocking.