Active production — AEC-Q100 qualified MEMS clock
The DSC1001AI1-048.0000: Rated AEC-Q100, this oscillator is qualified for automotive-grade applications where the temperature and vibration profile exceeds commercial silicon.
Operating envelope and power budget
Supply voltage range is 1.8 V to 3.3 V — it runs from a single rail common in automotive and industrial mixed-voltage designs without needing an extra regulator.
Frequency and timing margin
48 MHz output with ±50 ppm frequency stability — the stability spec is the decision point: if the downstream MCU or FPGA requires tighter than ±50 ppm over temperature and voltage, this part does not meet that margin. CMOS output is the standard interface for most digital loads — no level translation or termination network required on the clock line.
Package and board mounting
Surface-mount reflow with standard lead-free profile; no via-in-pad needed for this package style.