Skip to main content
Log in
Microchip Technology DSC1001AI1-016.0000 — Crystals & Oscillators

DSC1001AI1-016.0000 MEMS XO 16 MHz CMOS AEC-Q100 Active

MPNDSC1001AI1-016.0000
Active

Microchip Technology DSC1001AI1-016.0000, XO (Standard) MEMS oscillator, 16 MHz CMOS output, 1.8V~3.3V supply, ±50ppm stability, -40°C~85°C, 4-SMD, AEC-Q100 qualified.

$1.1700Ref. price · indicative, final on quote
Microchip Technology DSC1001AI1-016.0000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001AI1-016.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply6.5mA
Frequency16 MHz
Frequency stability±50ppm
Operating temperature-40°C~85°C
Size (Dimension)0.276\" L x 0.197\" W (7.00mm x 5.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead Exposed Pad

Product details

Why a MEMS oscillator beats quartz for this BOM slot

Supply voltage spans 1.8V to 3.3V, covering 1.8V, 2.5V, and 3.3V logic rails without a level translator — one part number serves multiple core voltages across a mixed-voltage board.

Maximum supply current is 6.5 mA, so the active power draw is modest; the standby mode cuts that further when the system is idle.

Housed in a 4-SMD, No Lead Exposed Pad package measuring 7.00mm x 5.00mm with a seated height of 0.90mm — a standard footprint that matches many quartz oscillator pinouts, simplifying a drop-in swap. Surface-mount assembly; the exposed pad aids thermal transfer if the board runs hot, though the 6.5 mA max current means self-heating is minimal.

Frequently asked questions

Is DSC1001AI1-016.0000 automotive qualified?

Yes, it carries AEC-Q100 qualification, making it suitable for automotive-grade applications including under-hood and cabin environments.

Can DSC1001AI1-016.0000 be used as a drop-in replacement for standard quartz oscillators?

Yes — the 4-SMD package and CMOS output match the footprint and logic level of many standard quartz oscillators. Confirm the supply voltage range (1.8V-3.3V) and frequency stability (±50ppm) against your existing part's specs before swapping.