Microchip DSC1001AE5-040.0000, 40 MHz XO (Standard), CMOS output, MEMS resonator, AEC-Q100 automotive grade, ±10 ppm stability, 1.8 V to 3.3 V supply, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 7.2mA |
| Current - supply (Disable) | 15µA |
| Frequency | 40 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Normal operation draws 7.2 mA max at 40 MHz.
Housed in a 4-SMD, no-lead package measuring 7.00 mm x 5.00 mm, with a seated height of 0.90 mm. Frequency stability is held to ±10 ppm across that range.
This part carries an active lifecycle status.
Yes, it is rated AEC-Q100, which means it has passed the automotive IC qualification suite (temperature grade, reliability stress, PPAP). It is suitable for automotive designs that require a qualified timing source.
Standby (power-down) mode draws 15 µA max. The function is listed as 'Standby (Power Down)' — the enable pin is controlled by the system logic, typically pulled high or low to toggle the output.