Skip to main content
Log in
Microchip Technology DSC1000DL5-PROGT — Crystals & Oscillators

DSC1000DL5-PROGT Programmable Oscillator – Microchip, Active

MPNDSC1000DL5-PROGT
Active

Microchip Technology DSC100 series, blank programmable oscillator, 4-VDFN package, 2.50mm x 2.00mm, 0.90mm seated height, surface mount

$2.0500Ref. price · indicative, final on quote
Microchip Technology DSC1000DL5-PROGT datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1000DL5-PROGT specifications
ParameterValue
SeriesDSC100
MountingSurface Mount
Programmable typeBlank (User Must Program)
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
PackageTape & Reel (TR); Cut Tape (CT)
Case4-VDFN

Product details

The DSC1000DL5-PROGT is a blank (unprogrammed) member of Microchip's DSC100 series of MEMS oscillators. It ships without a frequency set, so the user must program it before use — this is the defining procurement and design consideration for this order code. Housed in a 4-VDFN package measuring 2.50mm x 2.00mm with a seated height of 0.90mm, it suits space-constrained PCBs where a traditional quartz crystal plus load caps would take up more board area.

Microchip lists the DSC1000DL5-PROGT as Active.

Programming workflow — what the blank part requires

Because the part is a Blank (User Must Program) type, the buyer or contract manufacturer must have access to Microchip's programming tools and software to set the output frequency. The part does not generate a clock until programmed.

Frequently asked questions

How do I program the DSC1000DL5-PROGT?

The DSC1000DL5-PROGT ships as a blank (unprogrammed) device. You will need Microchip's programming hardware and software — typically the TimeFlash Field Programmer or the in-system programming tools described in the DSC1000 family datasheet — to set the desired output frequency. The part does not oscillate until programmed.

What is the frequency range of the DSC1000DL5-PROGT?

The evidence does not list a specific frequency range for this blank part. The DSC100 series covers a wide range of programmable output frequencies; consult the DSC1000 family datasheet for the supported frequency span and step size.

What are the alternatives to the DSC1000DL5-PROGT?

Within the same DSC100 series, fixed-frequency variants (non-blank) are available if you do not need field programmability. For a pin-compatible alternative from another manufacturer, the evidence does not list a direct cross — the blank-programmable MEMS oscillator market is narrow. Confirm the package (4-VDFN) and footprint before substituting.