Skip to main content
Log in
Microchip Technology DSC1000AL5-PROGT — Crystals & Oscillators

DSC1000AL5-PROGT Microchip Programmable Oscillator – Active

MPNDSC1000AL5-PROGT
Active

Microchip Technology DSC1000AL5-PROGT, DSC100 series, Blank (User Must Program) programmable oscillator, 4-VDFN Exposed Pad, Surface Mount, 7.00mm x 5.00mm, Active lifecycle.

$2.2100Ref. price · indicative, final on quote
Microchip Technology DSC1000AL5-PROGT datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1000AL5-PROGT specifications
ParameterValue
SeriesDSC100
MountingSurface Mount
Programmable typeBlank (User Must Program)
Size (Dimension)0.276\" L x 0.197\" W (7.00mm x 5.00mm)
Height - seated0.035\" (0.90mm)
PackageTape & Reel (TR); Cut Tape (CT)
Case4-VDFN Exposed Pad

Product details

Field-programmable oscillator — ships blank, you set the frequency

The DSC1000AL5-PROGT is a blank (user must program) oscillator from Microchip's DSC100 series — it arrives without a pre-set frequency, so you program it to the exact output your design needs during board assembly or as a pre-programmed reel.

Listed as Active by Microchip Technology — no end-of-life notice, no NRND flag.

4-VDFN Exposed Pad — footprint and thermal planning

Housed in a 4-VDFN Exposed Pad package, 7.00mm x 5.00mm body, seated height 0.90mm max.

Sourcing posture — quoted to order

No stock-holding claim; confirmed at RFQ.

Frequently asked questions

How can I order DSC1000AL5-PROGT and check availability?

Submit an RFQ with your target quantity and lead-time window. The part is Active from Microchip Technology; we source it through independent distribution and confirm availability and current pricing at quote time. Tape & Reel or Cut Tape packaging is available.

How do I program the DSC1000AL5-PROGT oscillator?

The part is Blank (User Must Program) — it ships without a frequency set. Microchip's programming tools and guidelines for the DSC100 series apply; the exposed pad must be properly soldered to a thermal plane during programming to maintain thermal stability.