Microchip Technology 25LC160DT-I/SN EEPROM, 16Kbit, SPI, 10 MHz, 2.5V-5.5V, -40°C to 85°C, 8-SOIC, Tape & Reel.
| Parameter | Value |
|---|---|
| Memory type | Non-Volatile |
| Mounting | Surface Mount |
| Supply voltage | 2.5V ~ 5.5V |
| Clock frequency | 10 MHz |
| Memory interface | SPI |
| Operating temperature | -40°C ~ 85°C (TA) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Technology | EEPROM |
| Memory size | 16Kbit |
| Memory format | EEPROM |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Memory organization | 2K x 8 |
| Write cycle time - word, page | 5ms |
The Microchip 25LC160DT-I/SN is a 16Kbit serial EEPROM with an SPI interface running at up to 10 MHz. Organised as 2K x 8 bits, it stores non-volatile data such as calibration coefficients, device configuration, or firmware patch tables in embedded systems.
Housed in an 8-SOIC package (0.154" width, 3.90 mm body), the 25LC160DT-I/SN mounts on standard SOIC-8 footprints.
The 25LC160DT-I/SN is sourced to order against an RFQ.
No — the 24AA128T-I/SN uses an I²C interface (2-wire), while the 25LC160DT-I/SN uses SPI (4-wire). They share the same 8-SOIC footprint but are not pin-compatible; a firmware and possibly a board layout change is required.