Skip to main content
Microchip Technology 24LC01B/SN — Discrete Semiconductors

Microchip 24LC01B/SN 1Kbit I²C EEPROM, SOIC-8, 400 kHz

MPN24LC01B/SN
End of Life

Microchip Technology 24LC01B/SN serial EEPROM, 1Kbit (128 x 8), I²C, 400 kHz, 2.5V-5.5V, 8-SOIC, Tube, commercial temp 0°C to 70°C.

$0.28Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

24LC01B/SN Technical Specifications
ParameterValue
Memory typeNon-Volatile
Mounting typeSurface Mount
Voltage2.5V ~ 5.5V
Frequency400 kHz
Memory interfaceI²C
Operating temperature0°C ~ 70°C (TA)
PackageTube
TechnologyEEPROM
Access time3.5 µs
Memory size1Kbit
Memory formatEEPROM
Case8-SOIC (0.154\", 3.90mm Width)
Memory organization128 x 8
Write cycle time - word, page5ms

Product details

1Kbit I²C EEPROM in SOIC-8 — BOM-fit for small-config storage

The Microchip 24LC01B/SN is a 1Kbit serial EEPROM organized as 128 x 8 bits, accessed over a two-wire I²C bus at clock frequencies up to 400 kHz. The 3.5 µs access time sets the minimum SCL high and low pulse widths; at 400 kHz the bus timing is tight enough that the master's I²C peripheral must meet the 2.5 µs data-hold requirement. The 5 ms write-cycle time means the part is busy after every page or byte write — the master polls the ACK bit or waits the full period before the next command.

SOIC-8 footprint and reflow profile

No special pad geometry or via-in-pad required; a standard 0.050-inch pitch SOIC land pattern places it cleanly. Tube delivery means the parts ship in anti-static tubes, not tape-and-reel. For high-volume pick-and-place, plan a tube feeder or a bulk-to-tape conversion step.

Active production and compliance posture

ROHS3 compliance covers the standard restricted substances (lead, mercury, cadmium, hexavalent chromium, PBBs, PBDEs, and four phthalates).