Zener surge clamp – 1500W, 143V breakdown, DO-13
The 1N6067A/TR: Its minimum breakdown voltage is 143V, with a typical reverse standoff of 128V and a maximum clamping voltage of 213V at 7A peak pulse current. Housed in a DO-13 through-hole package (supplier device package DO-13), it suits general-purpose circuit protection where a robust, leaded clamp is preferred over surface-mount alternatives.
Active production – TR packaging for reel-fed assembly
No power line protection feature is offered — this is a dedicated transient-voltage suppressor for signal or DC rail clamping.
Sourcing and fit for the BOM line
For a BOM requiring a 1500W bidirectional Zener in a DO-13 package, this part is a direct fit with no end-of-life risk in the near term. The 128V reverse standoff voltage makes it suitable for clamping on 120VAC or 100VDC rails where the nominal voltage stays below 128V. The 213V clamp ensures the protected circuit sees no more than that peak during a surge event.