What this 1N6062A Zener TVS diode does
The 1N6062A is a bidirectional Zener transient voltage suppressor (TVS) diode from Microchip Technology, designed to clamp voltage transients on power rails or signal lines. The DO-13 through-hole package suits board-level retrofits or designs where surface-mount isn't preferred.
The 1500W peak pulse power rating tells you this diode can absorb a substantial surge — useful for protecting 48V or 75V nominal rails in industrial or telecom gear. The 75V reverse standoff voltage means it starts conducting only above that level, so it won't load your line during normal operation. The clamping voltage of 125V at 12A defines the maximum voltage the protected circuit sees during a surge event — keep that below your downstream components' absolute maximum ratings. The DO-13 package is a metal-can through-hole package — it handles repeated thermal cycling well and is straightforward to hand-solder or rework in a lab.
Sourcing and lifecycle status
It is available through our distribution channel; we can quote it against your BOM quantity. The part is, which means it ships in tubes or loose pieces, not tape-and-reel — factor that into your pick-and-place planning if you use automated assembly.