Bidirectional 1500W transient suppressor in a DO-13 can
It protects a single bidirectional line — the 33V reverse standoff voltage sets the DC operating ceiling, so it fits 28V rails or 24V AC lines where transients can swing both polarities.
Package and mounting
With a breakdown voltage minimum of 37.1V and a clamping maximum of 53.9V at 28A peak pulse current, the 1N6053A keeps the protected node below 54V during a surge. The 28A rating is for the standard 10/1000µs pulse — shorter transients allow higher current before the device reaches its thermal limit. No power line protection — this part is for signal or low-power DC/AC lines, not mains.
Active production — sourcing via RFQ
Sourced to order against your BOM quantity — confirm the DO-13 through-hole package and bidirectional channel match your PCB layout before committing.