Skip to main content
Log in
Lattice Semiconductor Corporation LCMXO2-1200HC-6SG32C — FPGA / CPLD & Programmable Logic

LCMXO2-1200HC-6SG32C Lattice MachXO2 FPGA, 1280 LEs, 21 I/O

MPNLCMXO2-1200HC-6SG32C
Active

Lattice Semiconductor Corporation MachXO2 FPGA, LCMXO2-1200HC-6SG32C, 1280 logic elements, 21 I/O, 65536 total RAM bits, 32-UFQFN exposed pad, tray.

$8.5000Ref. price · indicative, final on quote
Lattice Semiconductor Corporation LCMXO2-1200HC-6SG32C datasheet (PDF)
Packaging32-UFQFN Exposed Pad
RoHSROHS3 Compliant
SeriesMachXO2
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LCMXO2-1200HC-6SG32C specifications
ParameterValue
SeriesMachXO2
MountingSurface Mount
Supply voltage2.375V ~ 3.465V
Operating temperature0°C ~ 85°C (TJ)
PackageTray
Number of i (O)21
Case32-UFQFN Exposed Pad
Total RAM bits65536
Number of LABs (CLBs)160
Number of logic elements (Cells)1280

Product details

Device identity and logic capacity

The LCMXO2-1200HC-6SG32C is a Lattice MachXO2 FPGA with 1280 logic elements arranged in 160 LABs/CLBs, plus 65536 total RAM bits on-chip. The 21 user I/O are brought out to a 32-UFQFN exposed pad package (5x5 mm body).

Supply voltage and temperature grade

The commercial temperature range is 0°C to 85°C (TJ), suitable for indoor equipment, test instrumentation, and telecom line cards where ambient stays below 70°C.

Housed in a 32-UFQFN exposed pad (supplier device package 32-QFN, 5x5 mm). The exposed paddle must be soldered to a thermal land on the PCB for adequate heat transfer; the datasheet's recommended footprint includes a 3.5x3.5 mm pad with via array under the paddle. Surface-mount assembly with standard reflow profile for lead-free solder.

Frequently asked questions

How does LCMXO2-1200HC-6SG32C compare to the LCMXO2-1200HC-4SG32C?

Both share the same 32-QFN package, 21 I/O, 1280 LEs, and 64 Kbit RAM. The -6 speed grade is faster than the -4 grade; the -6 supports higher clock frequencies and tighter timing margins. Footprint and pinout are identical, so a board designed for the -4 can accept the -6 without layout changes.