Skip to main content
Log in
KYOCERA AVX TPSY157K010R0150 — Specialty Capacitors

KYOCERA AVX TPSY157K010R0150 150 µF 10 V Tantalum Cap

MPNTPSY157K010R0150
Active

KYOCERA AVX TPS series, Molded Tantalum Capacitor, TPSY157K010R0150, 150 µF, 10 V, ±10%, 150 mOhm ESR, 2917 (7343 Metric) package.

$0.7210Ref. price · indicative, final on quote
KYOCERA AVX TPSY157K010R0150 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPSY157K010R0150 specifications
ParameterValue
TypeMolded
SeriesTPS
MountingSurface Mount
ESR150mOhm
Voltage - rated10 V
Operating temperature-55°C ~ 125°C
Size (Dimension)0.287\" L x 0.169\" W (7.30mm x 4.30mm)
Height - seated0.079\" (2.00mm)
PackageTape & Reel (TR)
FeaturesGeneral Purpose
Tolerance±10%
Capacitance150 µF
Case2917 (7343 Metric)
Manufacturer size codeY

Product details

Bulk decoupling for a 10 V rail

The TPSY157K010R0150: That ESR figure is the one that decides its ripple-handling ability in a power supply — lower ESR means less self-heating and better filtering of switching noise on a 10 V rail. It belongs to the TPS series, a general-purpose molded tantalum line from KYOCERA AVX, and carries a ±10% tolerance. The molded case gives it a consistent footprint and good mechanical stability during reflow.

Rework and board-fit realities

It reflows cleanly on a hot-air station if you preheat the board to 100 °C first; the molded body doesn't crack as readily as some conformal-coated parts under thermal shock. Surface-mount only — no through-hole equivalent in this order code.

Sourcing posture for this BOM line

It ships in tape-and-reel packaging, which is the standard for automated pick-and-place assembly.

Frequently asked questions

What is the ESR of TPSY157K010R0150 and why does it matter?

The ESR is 150 mOhm. This is the key parameter for bulk decoupling — it determines how much ripple current the capacitor can handle before self-heating becomes a problem. For a 10 V rail with a switching regulator, 150 mOhm is a moderate value; lower ESR parts would handle more ripple, but this one is adequate for general-purpose filtering.

What package does TPSY157K010R0150 use and can it be hand-reworked?

Yes, it can be hand-reworked with a hot-air station — preheat the board to around 100 °C to reduce thermal shock to the molded case, and the part lifts cleanly without pad damage.