33 µF, 35 V, 200 mOhm ESR — molded tantalum for power rail smoothing
The TPSV336M035R0200: The 200 mOhm ESR means it handles ripple current without excessive self-heating, which matters when you are smoothing a switching regulator output or decoupling a power rail that sees transient loads. The ±20% tolerance is standard for tantalum electrolytics — budget the full spread when setting the output voltage tolerance of the regulator it decouples.
Surface-mount 2924 case — board-fit and footprint
The molded package is self-aligning during reflow — no exposed metal edges to short against adjacent traces. The V case code (manufacturer size code V) matches the standard 2924 land pattern; the datasheet footprint is the one to use, not a generic 2924 pad, because the pad-to-pad gap varies by manufacturer. Surface-mount assembly with standard reflow profile — no special bake required unless the moisture barrier bag is compromised. Tape-and-reel packaging feeds pick-and-place without a reel change for most 8 mm tape feeders.
Active lifecycle — sourcing for production and repair
If the BOM needs a hedge, the TPS series includes multiple capacitance/voltage combinations in the same 2924 case — parametric substitution requires a board-level review of the ESR and ripple current requirements.