Skip to main content
Log in
KYOCERA AVX TPSR106K004R3000 — Specialty Capacitors

KYOCERA AVX TPSR106K004R3000 Tantalum Cap, 10 µF, 4 V, 0805

MPNTPSR106K004R3000
Active

KYOCERA AVX TPS series molded tantalum capacitor, TPSR106K004R3000, 10 µF, 4 V, ±10%, 3 Ohm ESR, 0805 (2012 Metric) package, Tape & Reel.

$0.1504Ref. price · indicative, final on quote
KYOCERA AVX TPSR106K004R3000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPSR106K004R3000 specifications
ParameterValue
TypeMolded
SeriesTPS
MountingSurface Mount
ESR3Ohm
Voltage - rated4 V
Operating temperature-55°C~125°C
Size (Dimension)0.081\" L x 0.051\" W (2.05mm x 1.30mm)
Height - seated0.047\" (1.20mm)
PackageTape & Reel (TR)
FeaturesGeneral Purpose
Tolerance±10%
Capacitance10 µF
Case0805 (2012 Metric)
Manufacturer size codeR

Product details

10 µF, 4 V, 3 Ohm ESR — bulk decoupling in 0805

The TPSR106K004R3000: The 3 Ohm ESR (Equivalent Series Resistance) determines the ripple current the part can handle before self-heating becomes a concern. For a 10 µF cap at 4 V, this ESR is typical for the TPS series and sets the ripple current rating — a key parameter when the capacitor sits on a switching regulator output or a high-frequency digital supply. Operating temperature spans -55°C to 125°C, covering industrial, automotive under-hood, and military-grade environments without derating at the high end. The 0805 (2012 Metric) package is widely used and rework-friendly — a standard hot-air station at 300°C with a fine nozzle lifts the part cleanly without lifting the pad, provided the board is preheated to 100°C.

Active lifecycle — no end-of-life risk

The part ships in Tape & Reel (TR) packaging, standard for automated pick-and-place assembly. The molded case construction provides mechanical robustness and a consistent footprint for reflow soldering.

Frequently asked questions

What is the ESR of TPSR106K004R3000 and why does it matter?

The ESR is 3 Ohm. This value sets the ripple current capability and self-heating under AC load. For a 10 µF cap at 4 V, a 3 Ohm ESR is typical for the TPS series and means the part can handle moderate ripple without excessive temperature rise — important for decoupling on switching supplies or digital ICs.

What package size is TPSR106K004R3000 and can it be reworked by hand?

It comes in an 0805 (2012 Metric) package, size code R. The 0805 footprint is rework-friendly with a standard hot-air station — preheat the board to 100°C, use a fine nozzle at 300°C, and the part lifts cleanly without pad damage. The molded case provides good thermal mass for even reflow.