Skip to main content
Log in
KYOCERA AVX TPSD685M035R0500 — Specialty Capacitors

KYOCERA AVX TPSD685M035R0500 Tantalum Cap, 6.8 µF, 35 V

MPNTPSD685M035R0500
Active

KYOCERA AVX TPS series, Molded Tantalum Capacitor, TPSD685M035R0500, 6.8 µF, 35 V, ±20%, 500 mOhm ESR, 2917 (7343 Metric) D case, Tape & Reel.

$0.5812Ref. price · indicative, final on quote
KYOCERA AVX TPSD685M035R0500 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPSD685M035R0500 specifications
ParameterValue
TypeMolded
SeriesTPS
MountingSurface Mount
ESR500mOhm
Voltage - rated35 V
Operating temperature-55°C ~ 125°C
Size (Dimension)0.287\" L x 0.169\" W (7.30mm x 4.30mm)
Height - seated0.122\" (3.10mm)
PackageTape & Reel (TR)
FeaturesGeneral Purpose
Tolerance±20%
Capacitance6.8 µF
Case2917 (7343 Metric)
Manufacturer size codeD

Product details

BOM-fit for a bulk-capacitor position

The TPSD685M035R0500: The 500 mOhm ESR is the figure that governs ripple-current handling and transient response in a power rail — a lower ESR means less self-heating and better decoupling at the switching frequency. For a 35 V rail, the 6.8 µF value provides enough charge storage to hold up the bus during a load step without the bulk capacitance of an aluminum electrolytic.

Case size, temperature grade, and shelf life

Tape & Reel packaging means it feeds into a pick-and-place line without a reel change; store the reels in a dry cabinet below 60% RH to avoid moisture absorption into the molded epoxy body.

Active lifecycle and supply posture

The TPS series is a long-running molded tantalum line, so the D-case 6.8 µF / 35 V variant should remain orderable for the foreseeable future.

Frequently asked questions

Where can I buy TPSD685M035R0500 and how is it quoted?

Sourced through independent distribution channels.

What is the ESR of TPSD685M035R0500 and why does it matter?

The ESR is 500 mOhm. This is the series resistance that limits ripple current and causes self-heating — a 500 mOhm ESR at 35 V means the part can handle moderate ripple without exceeding the 125°C temperature limit, but for high-ripple switching supplies a lower-ESR polymer or multi-anode tantalum may be needed.