Skip to main content
KYOCERA AVX TPSC107K010T0200 — Specialty Capacitors

TPSC107K010T0200 KYOCERA AVX TPS Series 100 µF 10 V Molded

MPNTPSC107K010T0200
Active

KYOCERA AVX TPS series, Molded Tantalum Capacitor, 100 µF ±10%, 10 V rated, 200 mOhm ESR at 100 kHz, -55°C to 125°C, 2312 (6032 Metric) case, Manufacturer Size Code C.

$0.8800Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPSC107K010T0200 specifications
ParameterValue
TypeMolded
SeriesTPS
MountingSurface Mount
ESR200mOhm @ 100kHz
Voltage - rated10 V
Operating temperature-55°C ~ 125°C
Size (Dimension)0.236\" L x 0.126\" W (6.00mm x 3.20mm)
Height - seated0.110\" (2.80mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesGeneral Purpose
Tolerance±10%
Capacitance100 µF
Case2312 (6032 Metric)
Manufacturer size codeC

Product details

100 µF bulk capacitance with controlled ESR

The TPSC107K010T0200 is a molded tantalum capacitor from the KYOCERA AVX TPS series, offering 100 µF capacitance with ±10% tolerance in a 2312 (6032 Metric) surface-mount package. A lower ESR means less voltage ripple for a given ripple current, but the 200 mOhm figure is typical for a C-case tantalum at this density.

Temperature range and voltage derating

The 10 V rated voltage is the maximum DC bias at 85°C; above that temperature, standard tantalum derating guidelines recommend applying no more than 50-67% of rated voltage for reliable operation. At 125°C, the voltage derating factor is typically 0.67, so the practical working voltage is around 6.7 V.

Frequently asked questions

What is the case code for TPSC107K010T0200?

The manufacturer size code is C, which corresponds to the 2312 (6032 Metric) case. Dimensions are 0.236" L x 0.126" W (6.00 mm x 3.20 mm) with a seated height of 0.110" (2.80 mm) max.

Is TPSC107K010T0200 a polarized capacitor?

Yes, tantalum capacitors are polarized. The positive terminal is marked on the molded body. Reverse voltage or AC bias will damage the part — verify orientation during PCB layout and assembly.