KYOCERA AVX TPS series, Molded, 47 µF, 10 V, ±10%, 500 mOhm ESR, -55°C to 125°C, 1411 (3528 Metric) / 1210 case
| Parameter | Value |
|---|---|
| Type | Molded |
| Series | TPS |
| Mounting | Surface Mount |
| ESR | 500mOhm |
| Voltage - rated | 10 V |
| Operating temperature | -55°C~125°C |
| Size (Dimension) | 0.138\" L x 0.110\" W (3.50mm x 2.80mm) |
| Height - seated | 0.083\" (2.10mm) |
| Package | Tape & Reel (TR) |
| Features | General Purpose |
| Tolerance | ±10% |
| Capacitance | 47 µF |
| Case | 1411 (3528 Metric), 1210 |
| Manufacturer size code | B |
The capacitance tolerance is ±10% across that range, so the filter corner frequency stays within budget.
The package is the standard 1411 (3528 Metric) / 1210 case size — 3.50 mm x 2.80 mm footprint with a seated height of 2.10 mm max. This is a widely used tantalum chip footprint; if your existing board already has pads for a B case-size tantalum, this part drops in without a layout change.
The two parts share the same capacitance (47 µF), voltage (10 V), tolerance (±10%), and case size (B / 1411). The difference is the ESR: 500 mOhm for the S0500 versus 400 mOhm for the S0400. If your circuit's ripple-current or transient-response budget can tolerate the higher ESR, the S0400 is a drop-in replacement. If the design is marginal on ESR, stick with the S0500.