330 µF at 10 V rated in a molded 2917 case (7343 Metric). The 23 mOhm ESR is the spec that matters for bulk decoupling: it keeps ripple voltage low and handles transient current spikes without excessive self-heating.
Molded case, surface-mount, tape-and-reel
Molded epoxy case, size code E (7.30 mm x 4.30 mm footprint, 4.30 mm seated height). Surface-mount for standard reflow. Supplied on tape and reel — store the reels dry; molded tantalums are less moisture-sensitive than chip caps but still benefit from a dry cabinet if the reel is opened and not re-baked.