KYOCERA AVX TAJ series, Type Molded, 33 µF ±10%, 20 V rated, 500 mOhm ESR, 2917 (7343 Metric) surface-mount package, -55°C to +125°C operating range.
| Parameter | Value |
|---|---|
| Type | Molded |
| Series | TAJ |
| Mounting | Surface Mount |
| ESR | 500mOhm |
| Voltage - rated | 20 V |
| Operating temperature | -55°C ~ 125°C |
| Size (Dimension) | 0.287\" L x 0.169\" W (7.30mm x 4.30mm) |
| Height - seated | 0.059\" (1.50mm) |
| Package | Tape & Reel (TR) |
| Features | General Purpose |
| Tolerance | ±10% |
| Capacitance | 33 µF |
| Case | 2917 (7343 Metric) |
| Manufacturer size code | X |
The molded case keeps moisture ingress low compared to uncoated chips, but the 125°C ceiling means you still need to derate voltage above 85°C per the standard tantalum derating curve.
The 2917 (7343 Metric) case measures 7.30 mm x 4.30 mm with a seated height of 1.50 mm. The manufacturer size code is X. Polarity is marked on the top — the anode end has a stripe.
The anode end is marked with a stripe on the top of the molded case. Tantalum capacitors are polarized — reverse voltage will damage the part, so confirm orientation against the PCB silkscreen before reflow.
This capacitor is rated 33 µF at 20 V. If the original 25 V part was used at a rail voltage below 20 V and the ripple current stays within the 20 V rating, the 33 µF value matches. But the voltage rating is lower — check the derating margin at your operating voltage before substituting.
The evidence does not list a RoHS compliance status. Confirm with the manufacturer or request a certificate of compliance with your RFQ.