Skip to main content
KYOCERA AVX TAJT475K010RNJ — Specialty Capacitors

TAJT475K010RNJ KYOCERA AVX Molded Tantalum Cap 4.7 µF 10 V

MPNTAJT475K010RNJ
Active

KYOCERA AVX TAJ series, Molded tantalum capacitor, 4.7 µF ±10%, 10 V rated, 5 ohm ESR, -55°C to +125°C, 1411 (3528 Metric) case, Tape & Reel

$0.3784Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TAJT475K010RNJ specifications
ParameterValue
TypeMolded
SeriesTAJ
MountingSurface Mount
ESR5Ohm
Voltage - rated10 V
Operating temperature-55°C~125°C
Size (Dimension)0.138\" L x 0.110\" W (3.50mm x 2.80mm)
Height - seated0.047\" (1.20mm)
PackageTape & Reel (TR)
FeaturesGeneral Purpose
Tolerance±10%
Capacitance4.7 µF
Case1411 (3528 Metric), 1210
Manufacturer size codeT

Product details

4.7 µF, 10 V, 5 ohm ESR — Molded tantalum for wide-temp designs

The TAJT475K010RNJ: This is a KYOCERA AVX TAJ-series molded tantalum capacitor rated at 4.7 µF with ±10% tolerance and a 10 V working voltage. The 5 ohm ESR sets the ripple-current ceiling and self-heating budget — at this ESR, the capacitor is best suited for decoupling and filtering where the AC ripple is modest, not for high-ripple bulk storage. The capacitance and ESR shift with temperature; at -55°C the capacitance typically drops 10-20% and ESR rises, so a design that relies on the full 4.7 µF at cold start should derate by at least 20%.

TAJT475K010RNJ carries an Active product status.

1411 (3528 Metric) case — low-profile footprint

The 1411 (3528 Metric) / 1210 case measures 3.50 mm x 2.80 mm with a seated height of 1.20 mm max. This low profile fits under tight board-to-board clearance or within mezzanine card stacks.

Frequently asked questions

What is the ESR of TAJT475K010RNJ and why does it matter?

The ESR is 5 ohm. This limits the ripple current the capacitor can handle without excessive self-heating. For decoupling or low-ripple filtering, 5 ohm is acceptable; for high-ripple applications like switching regulator outputs, a lower-ESR tantalum or ceramic should be considered.