Molded tantalum construction and TAJ series fit
The molded epoxy body provides consistent dimensional control and moisture resistance for automated assembly.
0.15 µF at 35 V — parametric fit check
Rated 0.15 µF with ±10% tolerance at 35 V DC, this part suits 24 V or 12 V rails where the derating rule (typically 50% of rated voltage for tantalum) leaves margin. The 21 Ohm ESR is moderate — expect higher ripple current heating than a low-ESR polymer cap, so budget the ripple current against the temperature rise curve.
The 1206 case size (3.20 mm x 1.60 mm) and 1.20 mm seated height fit tight PCB stack-ups.