Skip to main content
Log in
KYOCERA AVX TAJS106K006SNJ — Specialty Capacitors

TAJS106K006SNJ KYOCERA AVX 10 µF Molded Tantalum Capacitor

MPNTAJS106K006SNJ
Active

KYOCERA AVX TAJ series, molded tantalum capacitor, 10 µF ±10%, 6.3 V, 1206 (3216 metric), 4 Ohm ESR, -55°C to 125°C

KYOCERA AVX TAJS106K006SNJ datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TAJS106K006SNJ specifications
ParameterValue
TypeMolded
SeriesTAJ
MountingSurface Mount
ESR4Ohm
Voltage - rated6.3 V
Operating temperature-55°C~125°C
Size (Dimension)0.126\" L x 0.063\" W (3.20mm x 1.60mm)
Height - seated0.047\" (1.20mm)
PackageTape & Reel (TR)
FeaturesGeneral Purpose
Tolerance±10%
Capacitance10 µF
Case1206 (3216 Metric)
Manufacturer size codeS

Product details

Capacitance and voltage for rail decoupling

The TAJS106K006SNJ: 10 µF at 6.3 V — a common decoupling value for 3.3 V and 5 V rails, with enough voltage margin for a 3.3 V rail to stay below the 6.3 V ceiling even during start-up transients.

ESR and ripple current

4 Ohm ESR is typical for a 1206 tantalum at this capacitance — higher than a ceramic MLCC, but the tantalum construction delivers stable capacitance across temperature and voltage bias, which matters when the rail sees a wide DC bias swing.

Frequently asked questions

Is TAJS106K006SNJ RoHS compliant?

The evidence does not list a RoHS compliance status. Confirm with the manufacturer's datasheet or a compliance declaration at RFQ time.

Is TAJS106K006SNJ equivalent to the TPS series?

The TPS series from KYOCERA AVX typically offers lower ESR than the TAJ series. The TAJ is a general-purpose molded tantalum; the TPS is a low-ESR variant. Pin-compatible in the same case size, but the ESR difference may matter for high-ripple-current designs.