Bulk capacitance for 48 V bus and high-voltage rails
The TAJE106M050RNJV is a 10 µF molded tantalum capacitor from the TAJ series, rated at 50 V with an ESR of 800 mOhm at 100 kHz. The 50 V rating gives a 25 % derating margin on a 40 V bus and comfortable headroom on a 12 V or 24 V rail — the typical application is bulk decoupling in power supplies, DC-DC converter output filters, and hold-up capacitors in industrial or telecom equipment where the rail sees transients above the nominal voltage.
2000-hour endurance at 125 °C — thermal budget for harsh environments
Rated for 2000 hours at 125 °C with an operating temperature range of -55 to 125 °C, this capacitor is specified for environments where the ambient temperature pushes above the 85 °C commercial limit — think engine-bay electronics, outdoor base-station power stages, or downhole instrumentation where the capacitor sees sustained high temperature. The 125 °C rating means the capacitor's electrolyte and anode construction are designed for the full military-temperature band, not just a peak rating.
Listed as Active on the manufacturer's lifecycle status.
2917 footprint — board layout fit check
Housed in the 2917 (7343 Metric) case, size code E, measuring 7.30 mm x 4.30 mm with a seated height of 4.30 mm. The molded case is a standard tantalum chip footprint — the pad layout matches the EIA 2917 land pattern.