KYOCERA AVX TAJ series, molded tantalum capacitor, D-case 2917 (7343 Metric), 33 µF ±20%, 10 V rated, 1.1 Ohm ESR, -55°C to 125°C
| Parameter | Value |
|---|---|
| Type | Molded |
| Series | TAJ |
| Mounting | Surface Mount |
| ESR | 1.1Ohm |
| Voltage - rated | 10 V |
| Operating temperature | -55°C~125°C |
| Size (Dimension) | 0.287\" L x 0.169\" W (7.30mm x 4.30mm) |
| Height - seated | 0.122\" (3.10mm) |
| Package | Tape & Reel (TR) |
| Features | General Purpose |
| Tolerance | ±20% |
| Capacitance | 33 µF |
| Case | 2917 (7343 Metric) |
| Manufacturer size code | D |
The 1.1 Ohm ESR is moderate for a 33 µF D-case part. At -55°C the ESR climbs, so budget extra margin if the capacitor sees cold start-up.
The D-case (2917 / 7343 Metric) footprint is a standard across the TAJ family and is pin-compatible with other D-case tantalums from Kemet and Vishay, so the board layout does not lock you into one supplier.
The part is RoHS compliant per the TAJ series standard.
Yes, the TAJ series is RoHS compliant. The part carries no lead or restricted substances per the RoHS directive.
A direct replacement from Kemet or Vishay with the same 33 µF, 10 V, ±20 %, D-case, and ESR around 1 Ohm should fit the same PCB pads. Confirm the ESR and temperature range on the alternate datasheet before committing.