The TAJD336K020RNJ: Rated 33 µF at 20 V with a 900 mOhm ESR, this molded tantalum from the TAJ series is sized for bulk decoupling on a 12 V bus or energy hold-up through a short dropout. The 20 V rating provides about 60 % derating on a 12 V rail — typical practice for tantalum to keep the applied voltage below 2/3 of the rated voltage and avoid surge failures. The 2917 (7343 Metric) footprint, 7.30 mm x 4.30 mm body with a seated height of 3.10 mm, fits standard 12 V power-stage layouts. The D case code aligns with the EIA-535-BAAC standard, so the pad pattern matches other D-case tantalums from Kemet, Vishay, and Panasonic.
The molded construction and general-purpose feature set mean it ships as a standard catalog item. Reel quantities (Tape & Reel or Cut Tape) are the typical distribution format; no minimum-order-surplus constraints apply.
The molded epoxy case and solid tantalum anode hold capacitance and ESR across the full temperature range — no electrolyte freeze or dry-out at the extremes.