Molded tantalum construction and board fit
The molded case provides mechanical stability and moisture resistance suited for automated assembly and reflow soldering. Rated 15 µF at 50 V with ±20% tolerance, this part targets bulk decoupling and output filtering in power supplies where the voltage margin above the rail is tight — 50 V leaves headroom for a 24 V or 48 V bus with derating. In a switching regulator output, this ESR contributes to output ripple voltage; the 600 mOhm figure is typical for a D-case tantalum at this voltage and capacitance.
Temperature endurance and operating range
The D-case size (7.30 mm x 4.30 mm footprint, 3.10 mm seated height) fits standard 2917 land patterns. No special via-in-pad or thermal relief is required for this molded package, but the ESR and ripple current should be derated per the manufacturer's application notes for operation above 85°C.