KYOCERA AVX TAJ series, Molded tantalum capacitor, 6.8 µF, 25 V, ±10%, 2312 (6032 Metric) case, -55°C to 125°C
| Parameter | Value |
|---|---|
| Type | Molded |
| Series | TAJ |
| Mounting | Surface Mount |
| ESR | 2Ohm |
| Voltage - rated | 25 V |
| Operating temperature | -55°C ~ 125°C |
| Size (Dimension) | 0.236\" L x 0.126\" W (6.00mm x 3.20mm) |
| Height - seated | 0.110\" (2.80mm) |
| Package | Tape & Reel (TR) |
| Features | General Purpose |
| Tolerance | ±10% |
| Capacitance | 6.8 µF |
| Case | 2312 (6032 Metric) |
| Manufacturer size code | C |
The TAJC685K025H is a surface-mount molded tantalum capacitor from the KYOCERA AVX TAJ series, rated 6.8 µF at 25 V with ±10% tolerance. The 2312 (6032 Metric) case measures 6.00 mm x 3.20 mm with a seated height of 2.80 mm, fitting standard reflow profiles for tantalum chips. With a 2 Ohm ESR, this part is suited for bulk decoupling on power rails and low-frequency filtering where ripple current is moderate.
Design engineers need these core specs to confirm the part meets circuit requirements.
Sourcing and compliance teams must verify environmental regulations for procurement.
Board layout requires exact footprint dimensions; this affects fit and solder pad design.
Buyers need to plan production schedules and avoid line stoppages due to stockouts.
Alternative options are needed when the original part is unavailable or for cost savings.
Prototype builds and low-volume orders require accessible distributors with minimal lot sizes.