Skip to main content
KYOCERA AVX TAJA225K010HNJ — Specialty Capacitors

TAJA225K010HNJ KYOCERA AVX TAJ Series 2.2 µF 10 V Molded

MPNTAJA225K010HNJ
Active

KYOCERA AVX TAJ series, molded tantalum capacitor, 2.2 µF, 10 V rated, ±10% tolerance, 7 Ohm ESR at 100 kHz, 1206 (3216 Metric) surface-mount package

$0.5366Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TAJA225K010HNJ specifications
ParameterValue
TypeMolded
SeriesTAJ
MountingSurface Mount
ESR7Ohm @ 100kHz
Voltage - rated10 V
Operating temperature-55°C~125°C
Size (Dimension)0.126\" L x 0.063\" W (3.20mm x 1.60mm)
Height - seated0.071\" (1.80mm)
PackageTape & Reel (TR)
FeaturesGeneral Purpose
Tolerance±10%
Capacitance2.2 µF
Case1206 (3216 Metric)
Lifetime2000 Hrs @ 125°C
Manufacturer size codeA

Product details

The TAJA225K010HNJ: This is a molded tantalum capacitor from the TAJ series, rated 2.2 µF at 10 V with ±10% tolerance. The 1206 (3216 Metric) case is a common footprint, so it fits existing PCB layouts designed for that size.

Rated life at 125°C — where this cap fits on the board

That 125°C endurance means it can sit near a hot MOSFET or regulator in an industrial motor drive or an automotive underhood module — but 2000 hours at the ceiling is about 83 days continuous. If your ambient runs cooler, the life extends per the Arrhenius derating; if the application sees sustained 125°C, plan for periodic replacement or derate the voltage to reduce stress.

Listed as Active on the manufacturer's lifecycle.

Frequently asked questions

What is the ESR of TAJA225K010HNJ, and why does it matter?

The ESR is 7 Ohm at 100 kHz. That is a relatively high ESR for a 2.2 µF tantalum cap — it will dissipate more heat under ripple current and produce higher output ripple in a switching regulator filter. For decoupling a digital IC at lower frequencies (below 1 MHz), the 7 Ohm impedance may still be acceptable; for a low-ripple power rail, a lower-ESR capacitor (e.g., a polymer tantalum or MLCC) would be a better fit.