Skip to main content
KYOCERA AVX SCCT47B356SRB — Supercapacitors

KYOCERA AVX SCCT47B356SRB Supercapacitor, 35 F, 2.7 V

MPNSCCT47B356SRB
Active

KYOCERA AVX SCC Series Supercapacitor, SCCT47B356SRB, 35 F, 2.7 V, -10% +30% Tolerance, Through Hole, Radial Can, PC Pins.

$4.2900Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SCCT47B356SRB specifications
ParameterValue
SeriesSCC
MountingThrough Hole
Voltage - rated2.7 V
Operating temperature-40°C~65°C
Size (Dimension)0.492\" Dia (12.50mm)
Height - seated1.909\" (48.50mm)
PackageBulk
Tolerance-10%, +30%
Capacitance35 F
TerminationPC Pins
Lead spacing0.217\" (5.50mm)
CaseRadial, Can
Lifetime2000 Hrs @ 65°C

Product details

35 F, 2.7 V radial supercapacitor — SCC series

The SCCT47B356SRB is a 35 F supercapacitor rated at 2.7 V from KYOCERA AVX's SCC series, packaged in a through-hole radial can with PC pin termination. The 35 F capacitance at 2.7 V stores roughly 127 J of energy — enough to bridge a power gap for a few seconds in a backup or peak-power assist circuit, where the low ESR supports high discharge currents compared to a battery of similar volume. Operating temperature spans -40°C to 65°C, with a rated lifetime of 2000 hours at the upper limit — the electrolyte degradation accelerates above 65°C, so derating the voltage or ambient extends service life in warm enclosures.

Lead spacing is 0.217" (5.50 mm) — this footprint is common among 35 F supercapacitors in this form factor, so the board layout is straightforward. Tolerance of -10% / +30% means the actual capacitance can land between 31.5 F and 45.5 F — the lower bound matters for hold-up time calculations; design the backup duration against the minimum, not the nominal.

Frequently asked questions

How can I order SCCT47B356SRB or check stock?

The SCCT47B356SRB is sourced to order against your BOM quantity.

What is the closest pin-compatible alternative to SCCT47B356SRB?

The SCC series includes other capacitance/voltage variants in the same radial can footprint, but a direct replacement would require verifying the lead spacing and diameter match.