Skip to main content
Log in
Infineon Technologies TLE9250VLEXUMA1 — Logic ICs

TLE9250VLEXUMA1 CAN FD Transceiver – Infineon, 5 Mbps

MPNTLE9250VLEXUMA1
End of Life

Infineon TLE9250VLEXUMA1, Automotive, AEC-Q100, CANbus transceiver, 1/1 driver/receiver, 5 Mbps data rate, 4.5V to 5.5V supply, PG-TSON-8-1 package, -40°C to 150°C junction temperature.

$1.93Ref. price · indicative, final on quote
Infineon Technologies TLE9250VLEXUMA1 datasheet (PDF)
Packaging8-TDFN Exposed Pad
RoHSROHS3 Compliant
SeriesAutomotive, AEC-Q100
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLE9250VLEXUMA1 specifications
ParameterValue
TypeTransceiver
SeriesAutomotive, AEC-Q100
MountingSurface Mount, Wettable Flank
Supply voltage4.5V ~ 5.5V
ProtocolCANbus
Operating temperature-40°C ~ 150°C (TJ)
PackageTape & Reel (TR); Cut Tape (CT)
Data rate5Mbps
Case8-TDFN Exposed Pad
Receiver hysteresis100 mV
Number of drivers (Receivers)1/1

Product details

Active CAN FD transceiver in a wettable-flank TSON

The TLE9250VLEXUMA1 is an Infineon CAN FD transceiver rated for 5 Mbps — fast enough for the latest CAN FD frames without bit-timing margin issues at the bus level. The PG-TSON-8-1 package with wettable flank means the solder joints are optically inspectable after reflow — a requirement for many automotive Tier-1 assembly lines.

150°C junction — under-hood ready

The 100 mV receiver hysteresis filters out bus noise from alternator ripple and motor drivers without external filtering. Supply range is 4.5V to 5.5V — it runs directly off a 5V rail with headroom for load-dump transients.

ROHS3 compliant and AEC-Q100 qualified, which covers the stress tests required for automotive ECU qualification.

Frequently asked questions

Is the TLE9250VLEXUMA1 a CAN FD transceiver?

Yes — the listed protocol is CANbus and the data rate is 5 Mbps, which meets the CAN FD specification for flexible data-rate frames. It handles the faster phase without bit-timing renegotiation.

What is the operating temperature of the TLE9250VLEXUMA1?

The 150°C ceiling is the key spec for under-hood or exhaust-adjacent placements where standard 125°C transceivers would derate.

Does the TLE9250VLEXUMA1 support a 5V supply?

Yes — the supply range is 4.5V to 5.5V, so a nominal 5V rail is within spec. The 0.5V headroom above 5V handles load-dump events without an external clamp.