600 V, 6 A NPT IGBT in a surface-mount DPak
The Infineon SGD02N60 is a 600 V, 6 A NPT (Non-Punch-Through) IGBT in a surface-mount TO-252-3 (DPak) package. It targets hard-switching applications like motor drives, PFC stages, and general-purpose inverters where the 600 V breakdown and 6 A continuous collector current fit the bill. The NPT structure gives it a short-circuit withstand capability and a positive temperature coefficient that simplifies paralleling — useful when you need to spread the load across multiple devices. Gate charge is 14 nC. On-state voltage is 2.4 V at 15 V gate drive and 2 A collector current. Switching energy per cycle is 36 µJ on and 28 µJ off under 400 V bus, 2 A, and a 118 Ω gate resistor. The junction temperature range spans -55 to 150 °C, so the part is comfortable in environments that see extreme cold or sustained heat — think outdoor telecom cabinets, engine compartments, or industrial drives near ovens. Maximum power dissipation is 30 W; you will need adequate copper area on the PCB or a small heatsink to keep the junction below 150 °C when running near the continuous current limit.
Package and mounting
The SGD02N60 comes in a TO-252-3 (DPak) surface-mount package, supplier device code PG-TO252-3-11. The DPak footprint is standard for this current and voltage class — three leads plus a tab that carries the collector. The tab is electrically live, so the PCB layout must account for creepage and clearance to adjacent traces.
Lifecycle and compliance
It is ROHS3 compliant, so it meets the current restriction on hazardous substances without exemptions. For new designs, this part is a safe choice from a lifecycle perspective; no need to qualify a replacement or stockpile for an impending EOL.