Skip to main content
Infineon Technologies S25FS512SDSNFB010 — Discrete Semiconductors
Infineon Technologies

S25FS512SDSNFB010 512 Mbit NOR Flash, 80 MHz, AEC-Q100

MPNS25FS512SDSNFB010
End of Life

Cypress FS-S series Automotive, AEC-Q100, 512 Mbit NOR Flash, SPI - Quad I/O, QPI, 80 MHz, 1.7V ~ 2V, -40°C ~ 105°C, 8-WDFN Exposed Pad, Tray.

$11.34Ref. price · indicative, final on quote
S25FS512SDSNFB010 datasheet
Packaging8-WDFN Exposed Pad
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

S25FS512SDSNFB010 Technical Specifications
ParameterValue
SeriesAutomotive, AEC-Q100, FS-S
Memory typeNon-Volatile
Mounting typeSurface Mount
Voltage1.7V ~ 2V
Frequency80 MHz
Memory interfaceSPI - Quad I/O, QPI
Operating temperature-40°C ~ 105°C (TA)
PackageTray
TechnologyFLASH - NOR
Memory size512Mbit
Memory formatFLASH
Case8-WDFN Exposed Pad
Memory organization64M x 8

Product details

Memory interface and throughput

The S25FS512SDSNFB010: The Quad I/O SPI interface allows four data lines for read operations, quadrupling throughput over standard SPI without increasing the pin count. QPI mode extends this to command and address cycles as well, reducing protocol overhead. At 80 MHz, the effective read throughput reaches roughly 40 MB/s in Quad I/O — sufficient for fast boot sequences in automotive gateways or ADAS pre-load operations.

Package and footprint

Housed in an 8-WSON package with exposed pad (supplier package 8-WSON 6x8 mm), this is a surface-mount part for reflow soldering.

Lifecycle and sourcing posture

The AEC-Q100 qualification means the part carries the full automotive PPAP documentation package.

Frequently asked questions

Is S25FS512SDSNFB010 AEC-Q100 qualified?

Yes, it is part of the Automotive, AEC-Q100 FS-S series, qualified for automotive applications.

What is the difference between S25FS512SDSNFB010 and S25FL512SAGMFBG10?

The S25FL512SAGMFBG10 is a sibling from the FL-S series operating at 2.7V supply and 133 MHz, while the S25FS512SDSNFB010 runs at 1.7V to 2V and 80 MHz. The FS-S part is designed for low-voltage 1.8V systems; the FL-S part suits 2.7V to 3.6V rails. Both are AEC-Q100 qualified and share the same 512 Mbit density and 64M x 8 organization.