Skip to main content
Infineon Technologies S25FS512SDSBHB210 — Discrete Semiconductors
Infineon Technologies

S25FS512SDSBHB210 NOR Flash, 512 Mbit, SPI, AEC-Q100, 24-BGA

MPNS25FS512SDSBHB210
End of Life

Cypress S25FS512SDSBHB210, Automotive AEC-Q100 FS-S series, 512 Mbit NOR Flash, SPI Quad I/O/QPI, 80 MHz, 1.7V–2V, -40°C to 105°C, 24-TBGA (8x6 mm).

$11.34Ref. price · indicative, final on quote
S25FS512SDSBHB210 datasheet
Packaging24-TBGA
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

S25FS512SDSBHB210 Technical Specifications
ParameterValue
SeriesAutomotive, AEC-Q100, FS-S
Memory typeNon-Volatile
Mounting typeSurface Mount
Voltage1.7V ~ 2V
Frequency80 MHz
Memory interfaceSPI - Quad I/O, QPI
Operating temperature-40°C ~ 105°C (TA)
PackageTray
TechnologyFLASH - NOR
Memory size512Mbit
Memory formatFLASH
Case24-TBGA
Memory organization64M x 8

Product details

Automotive NOR flash for code shadowing and data logging

The Cypress S25FS512SDSBHB210 is a 512 Mbit NOR flash from the FS-S series, qualified to AEC-Q100 for automotive applications. It stores firmware and calibration data in an ECU, AD.

512 Mbit in a 24-BGA — what that means for the board

The 64M x 8 organization gives you 512 Mbit of non-volatile storage in a 24-ball BGA package that measures 8x6 mm. That is a compact footprint for a dense code store, but it is a BGA — so it needs a reflow oven and X-ray inspection. Not a field-swap part; plan for it at the PCB layout stage. The SPI Quad I/O and QPI interface let you read at higher throughput than a standard SPI part, which matters if you are executing code in place or doing over-the-air updates on a tight boot-time budget.

Lifecycle and sourcing reality

This part carries an Active product status and is ROHS3 compliant. No end-of-life notice on the horizon, so it is safe to freeze into a production BOM.

Frequently asked questions

Is S25FS512SDSBHB210 compatible with SPI protocol?

Yes, it uses a SPI interface with Quad I/O and QPI support. The Quad I/O mode uses four data lines for higher read throughput, and QPI allows command and address cycles over the same four lines.