Skip to main content
Log in
Infineon Technologies S25FL512SAGMFIG11 — Memory (DRAM / SRAM / Flash / EEPROM)

Infineon S25FL512SAGMFIG11 512Mbit SPI NOR Flash, 133 MHz

MPNS25FL512SAGMFIG11
Active

Infineon Technologies FL-S series SPI NOR flash memory, 512 Mbit, 16-SOIC wide-body (7.50 mm), 133 MHz quad-I/O, 2.7-3.6 V supply, -40 to 85 °C, tube.

$9.6500Ref. price · indicative, final on quote
Infineon Technologies S25FL512SAGMFIG11 datasheet (PDF)
Packaging16-SOIC (0.295", 7.50mm Width)
RoHSROHS3 Compliant
SeriesFL-S
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

S25FL512SAGMFIG11 specifications
ParameterValue
SeriesFL-S
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency133 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C ~ 85°C (TA)
PackageTube
TechnologyFLASH - NOR
Memory size512Mbit
Memory formatFLASH
Case16-SOIC (0.295\", 7.50mm Width)
Memory organization64M x 8

Product details

512 Mbit SPI NOR in a 16-SOIC wide-body

The Infineon S25FL512SAGMFIG11 is a 512 Mbit SPI NOR flash from the FL-S family, organized as 64M x 8 and accessed over a quad-I/O SPI bus at up to 133 MHz.

Package and rework considerations

The 16-SOIC wide-body is a gull-wing leaded package with a 1.27 mm pitch — easy to hand-solder or reflow. Pin 1 is clearly marked with a chamfer on the package body and a dot on the top surface — no ambiguity under a magnifier. The wide body gives good clearance for a hot-air nozzle; the leads are robust enough that a misaligned reflow can be touched up with a fine iron without lifting pads.

Sourcing and lifecycle posture

Peer variants S25FL512SAGMFIG10, S25FL512SAGMFIR10, and S25FL512SAGMFI010 share the same silicon, package, and temperature grade — the only difference is the delivery medium (tube vs tray). Any of these can be substituted on the same PCB without a layout change, provided the pick-and-place feeder is set for the correct carrier.

Frequently asked questions

What is the difference between S25FL512SAGMFIG11 and S25FL512SAGMFIG10?

The only difference is the packaging medium: the S25FL512SAGMFIG11 ships in a tube, while the S25FL512SAGMFIG10 ships in a tray. The silicon, package footprint (16-SOIC wide-body), memory size (512 Mbit), interface (quad-SPI at 133 MHz), voltage range (2.7-3.6 V), and temperature grade (-40 to 85 °C) are identical. Either part can be used on the same PCB without any board change.

What supply voltage does the S25FL512SAGMFIG11 require?

This covers the standard 3.3 V logic supply with margin for droop. The device does not require a separate I/O or core voltage — one rail powers the entire flash.