Skip to main content
Log in
Infineon Technologies S25FL256SAGBHVA00 — Memory (DRAM / SRAM / Flash / EEPROM)

S25FL256SAGBHVA00 256 Mbit NOR Flash, Quad-SPI, 133 MHz, BGA

MPNS25FL256SAGBHVA00
End of Life

Cypress FL-S series S25FL256SAGBHVA00, 256 Mbit NOR Flash memory, SPI - Quad I/O interface, 133 MHz clock, 2.7V-3.6V supply, -40°C to 105°C, 24-TBGA (8x6 mm) package, Tray.

$3.9978Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

S25FL256SAGBHVA00 specifications
ParameterValue
SeriesFL-S
Memory typeNon-Volatile
MountingSurface Mount
Voltage2.7V ~ 3.6V
Frequency133 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C ~ 105°C (TA)
PackageTray
TechnologyFLASH - NOR
Memory size256Mbit
Memory formatFLASH
Case24-TBGA
Memory organization32M x 8

Product details

256 Mbit NOR Flash in a 24-BGA — what this part is

The S25FL256SAGBHVA00: It uses a Quad-SPI (SPI - Quad I/O) interface that clocks at 133 MHz, giving the host controller fast read throughput for execute-in-place (XIP) firmware or data logging. The supply range is 2.7V to 3.6V, which maps directly to 3.3V logic systems without a level shifter.

The 105°C upper limit is the spec that keeps the BOM valid for extended-temperature environments without a separate screening step.

Quad-SPI at 133 MHz — what the clock speed buys you

133 MHz clock on the Quad I/O interface supports XIP of firmware from Flash. For a 256 Mbit density, this clock rate is typical of the FL-S series.

Package and board-level handling

24-TBGA (8x6 mm) package is a surface-mount BGA. Supplier device package code is 24-BGA (8x6).

For a BOM line, this means no imminent obsolescence risk, and the part can be qualified into a new design with confidence that supply will hold through the production run.

Frequently asked questions

Is S25FL256SAGBHVA00 compatible with 3.3V systems?

Yes. The supply voltage range is 2.7V to 3.6V, which covers the standard 3.3V rail. No level shifting is needed for the SPI signals if the host controller also runs at 3.3V.

What is the replacement or equivalent for S25FL256SAGBHVA00?

The FL-S series has multiple density and package variants, but a drop-in equivalent from another manufacturer would require verifying the Quad-SPI command set, the 24-BGA ball map, and the 133 MHz timing. For a cross-reference, compare against other 256 Mbit Quad-SPI NOR Flash in a 24-BGA package from the same series, such as the S25FL256SAGBHV200 or similar suffix variants — the base product number S25FL256 covers the 256 Mbit density across the FL-S family.