Infineon FL-L series, 256 Mbit NOR Flash, 133 MHz SPI Quad I/O/QPI, 2.7–3.6 V, -40°C~105°C, 32M×8, 24-TBGA (8×6 mm) tray.
| Parameter | Value |
|---|---|
| Series | FL-L |
| Memory type | Non-Volatile |
| Mounting | Surface Mount |
| Supply voltage | 2.7V ~ 3.6V |
| Clock frequency | 133 MHz |
| Memory interface | SPI - Quad I/O, QPI |
| Operating temperature | -40°C~105°C(TA) |
| Package | Tray |
| Technology | FLASH - NOR |
| Memory size | 256Mbit |
| Memory format | FLASH |
| Case | 24-TBGA |
| Memory organization | 32M x 8 |
The S25FL256LAGBHV020: SPI Quad I/O and QPI at 133 MHz, 256 Mbit, 2.7–3.6 V, 24-TBGA (8×6 mm).
Listed as Active. That means it remains a safe selection for new designs and production ramps, and the supply channel should be the standard distribution route — no need to chase surplus or broker stock for continuity.
24-TBGA (8×6 mm), surface mount.
SPI Quad I/O and QPI at 133 MHz, 2.7–3.6 V.
Yes, it supports both Quad I/O and QPI modes over the SPI bus, clocked at 133 MHz. This allows read throughput up to roughly 66 MB/s in Quad I/O mode.
The SPI I/O are 3.3 V tolerant, so no level translation is needed when connecting to a 3.3 V host controller.